1Gbps Ethernet interface , max 100m transmission
-
128MB on-board frame buffer
-
Support multiple image data formats
-
Conform to CE, FCC, RoHS certifications
-
Software trigger/Hardware trigger/Free run mode
-
Compatible with GigE Vision V2.0 protocol and GenICam standard
Model |
Sensor |
Sensor type |
Shutter |
Resolution |
Frame rate ( fps ) |
Bit depth |
Interface |
Mono/Color |
Pixel size (μm ) |
Sensor size |
DH-MV-A7160MG000E |
IMX273 |
CMOS |
Global |
1440x1080 |
77 |
12 |
GigE, POE |
Mono |
3.45x3.45 |
1/2.9" |
DH-MV-A7040CG000E |
IMX273 |
CMOS |
Global |
1440x1080 |
77 |
12 |
GigE, POE |
Color |
3.45x3.45 |
1/2.9" |
Model |
DH-MV-A7160MG000E |
DH-MV-A7160CG000E |
|
Effective Pixels |
1.6MP |
||
SNR |
>38dB |
||
Dynamic Range |
70dB |
||
GPIO |
6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output, 1 configurable input/output without opto isolation |
||
Image Format |
Mono8/10/10Packed/12/12Packed |
BayerGB8/10/10Packed12/12Packed, YUV422Packed Mono8, BayerRG8/10/10Packed12/12Packed |
|
Binning |
Support |
-- |
|
ROI |
Support |
||
Gain |
0dB~48dB |
||
Gamma |
Range from 0 to 4,support LUT |
||
Exposure Time |
26μs~1s |
||
Trigger Mode |
Software trigger/Hardware trigger/Free run mode |
||
Image Buffer |
128MB on-board buffer |
||
User Setting |
Support two sets of user-defined configurations |
||
Dimensions |
29mmx29mmx42mm( not including lens mount and rear case connector) |
||
Weight |
88g |
||
Power Supply |
POE/DC power supply by Hirose connector,with voltage range from 6V to 26V |
||
Power Consumption |
12V≈3.6W |
||
Lens Mount |
C |
||
Temperature |
Storage temperature: -30° C~ + 80° C; Operation temperature: -30° C~+50° C |